Phenson Lighting Tech.,Ltd
Lighting up the Future
Add to Cart
WS2813B / WS2813 DC5V 30LED Waterproof IP67 Slicone Tube RGB LED Strip
Feature :
1. ws2813 led strip, breakpoint continue, one led broken, no affect other the behind led work.
2. One WS2813 IC control ONE LED Chip; Users can cut the ribbon tape every 1 LEDS
3. Each LED is individually addressable, with 8 bits of green, red and blue data shifted in for 24 bit color;
4. With 4pin LED lamps for the digital strip
5. Controller: we usually select SD controller, you also could use DMX controller, DMX decoder, Arduino, Artnet.This product can achieve effects and animations by controller , for example RGB seven colors gradual change, jumping change, Fading , flashing, color chasing, color sliding, Fading, Dimming mode
6. This is the highest resolution for the moment
7. Controller, Power supply are available
8. For WS2813b IC, we have DC5V; 30/60/96/144 led per meter. Great choice.
9. The product is widely used in building outline lights, entertainment quasi-decorative lighting, advertisement decorative lighting and so on.
10. Low voltage DC power supply safety, Convenience.
WS2813 30LED Addressable LED Strip Light Description :
· WS2813 a new version addressable LED based on WS2812B.
· The advantage is when 1pcs LED burn, the other LED will keep working.
· It’s 5meters in a reel and 30 Pixel/LED per meter cut-able of each unit.
· White & black both color available on surface of
· LED chip and PCB, but our standard one is white LED and White color PCB also.
· DC5V input, suggest inject Power from start and end of the reel.
· 3M adhesive attached on strip, waterproof version IP65,silicon tube coating.
· With a pair of JST SM connector (IP20).
Parameter :
| LED Chip | SMD5050 RGB LED chip |
| IC Chip | SMD 5050 RGB |
| LED Quantity | 30LEDs/m |
| Input Voltage | DC5V |
| Watts | 7.2W/M |
| IC Chip | WS2813 IC built-in |
| IP Rate | IP20(non-waterproof), IP65(Silicon-tube waterproof) |
| PCB Color | White PCB, Black PCB |
| View Angle | 120° |
| Standard Reel Length | 5meter/roll, also can be customized |
| PCB Width | 10mm |
| Operating Temperature | -20 ~ +40°C |
| Storage Temperature | -40 ~ +80°C |
| Color | Addressable full color |
Notes :
· Please read the specifications and precautions carefully before installation
· Please do not use nails or sharp instruments to intall led strip on the object, use double-sided tape or glue or wall mounted on plywood
· Fixed led strip, you can not use acidic glue, it is recommended to use a neutral glue.
· This product is a constant voltage DC5V, make sure Power is right before installation, after installation, check the wiring is correct or not , so that avoid the product been burned
· This product is recommended use in parallel. when the length is more than five meters, the tail so be power to ensure the brightness is enough or uneven
Picture :
