Phenson Lighting Tech.,Ltd
Lighting up the Future
Add to Cart
Automotive Interior 4014 Series White SMD Zener Diode For LCD Backlight
Feature :
1.Dimension(length*width*height: mm): 4.0* 1.4* 0.65 mm
2.High heat resistance, low thermal resistance, high reliability
3. Light color consistency is good, high color gamut
4.High light efficiency, high brightness, high current drive
5.Lead-free package, in line with Rohs
6.Electrostatic Discharge Withstand Voltage Level ≥2000V / ≥8000V(ESD Protection Device).
7.Package 2000pcs/reel
8.PCT lead frame
9.Moisture Sensitivity Level.2
10Primer process for the gold plating has sulphide protection.
11.With Zener to protect the ESD
12.Sample available
13.LCD Backlight
Package Dimmension :
Application :
1. Dashboard
2. Switch & Button
3. Map Lighting
4. Ambient
5. Monitor
Description :
The product qualification test plan is based on the guidelines of AEC‐Q101 Stress Test Qualification for Automotive Grade Discrete Semiconductors.
Parameter :
| Part No. | lm | X/Y/WD(nm) | Vf(V) | If (mA) | View angle |
| RF-WMRC14DS-AA-HZ | 30 | (0.265,0.24) | 2.9 | 90 | 120° |
| RF-WMRC14DS-AA-QZ | 40 | (0.265,0.24) | 3 | 120 | 120° |
| RF-WMRC14DS-AA-JZ | 50 | (0.265,0.24) | 3.1 | 150 | 120° |
2. The above forward voltage measurement allowance tolerance is 0.1V.
3. The below color coordinates measurement allowance tolerance is 0.003.
4. the above luminous flux measurement allowance tolerance ±10%.
5. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
6. All measurements were made under the standardized environment of Refond.
7.When the LEDs are in operation the maximum current should be decided after measuring the package temperature,junction temperature should not exceed the maximum rate.LED
Technical Support
Pass the international benchmarking enterprises and third-party SGS social responsibility audit, in line with EICC electronics industry code of conduct requirements.
In line with ROHS, REACH, HF, IEC / EN 62471, LM-80 and other international standards in Third party testing result.
TS16949
ISO9001
QC 080000
ISO14001
OHSAS18001
ISO17025
We use scientific research and innovation as a driving force for development, build the core competitiveness of enterprises, is committed to every customer can get more secure, more environmentally friendly products.
Laboratory
Experimental Center was established in 2013, covers an area of over 600 square meters
CNAS Certification
December 2015 CNAS certification, included in the national laboratory directory. For the company's technological innovation and product development to provide a complete means of testing, product quality management to provide a wealth of reliable test data.